XXH-024 Automotive Gateway System Training Box
About
Feature
Technical Parameter
Basic Configuration
I. About the product
Understand the working principle of the gateway. The CAN network gateway communication system circuit is built by J533 diagnostic interface control unit, J519 vehicle power grid control unit, J386 left front door control unit, J386 right front door control unit, etc. The left and right window motors can be controlled by switch, and the messages sent and received during operation can be read by the CAN box to perform data analysis and data return of CAN network communication. The working parameters of each component of the bare gateway control unit can be measured to gain a deeper understanding of the working principle of the gateway.
Understand the working principle of the gateway. The CAN network gateway communication system circuit is built by J533 diagnostic interface control unit, J519 vehicle power grid control unit, J386 left front door control unit, J386 right front door control unit, etc. The left and right window motors can be controlled by switch, and the messages sent and received during operation can be read by the CAN box to perform data analysis and data return of CAN network communication. The working parameters of each component of the bare gateway control unit can be measured to gain a deeper understanding of the working principle of the gateway.
II. Features
1. A normally working gateway system capable of CAN bus communication;
2. Understand the composition of CAN bus communication system;
3. Measure the CAN bus communication data waveform and CAN bus communication voltage;
4. CAN bus communication window motor experiment;
5. Use the car decoder to connect to the OBD II diagnostic socket to read the data stream and fault code of the gateway control unit;
6. CAN bus communication data analysis;
7. CAN bus communication data is sent back to control the corresponding actuator action.
III. Basic Parameter
1.Dimensions: 435mmx325mmx200mm(length x width x height)
2.Approximate weight: about 4.5KG
3.Operating voltage: AC220V DC12V
4.Working temperature: -20℃ - +40℃
5.Working power: ≤100W